User's Manual

DSL Gateway/Router — User Manual
Page 13 Total 13 Pages
3.5 WIRELESS CONFIGURATION
Press “Wireless” on the top of web pages to enter wireless section. You can select to configure wireless
setup, security and management.
3.5.1 WIRELESS SETUP
Click “Setup” on the left menu to setup basic wireless parameters. In default, check “Enable Ｗireless”
box to launch wireless AP.
l SSID (Service Set Identifier): The mobile users cannot access WLAN until setting their SSID as the same
value of the wireless ADSL. The SSID value of the ADSL is “default”
l Hidden Access Point: If checked, wireless station will no see SSID of the ADSL.
3.5.2 WIRELESS SECURITY
Press “Security” on the left menu to construct wireless security. You can select to configure WEP
encryption, Shared, 802.1x, WPA, and WPA2 authentication.
l WEP Encryption
Select “Enabled” of the WEP encryption list. You can enter WEP encryption page.