User's Manual

錯誤 ! 尚未定義樣式。 User’s Guide Configuring your Computers
82
A Configuring your Computers
This appendix provides instructions for configuring the Internet
settings on your computers to work with the
錯誤
!
尚未定義樣
式。
.
Co nfig uring Ethe rne t PC s
Be fo re yo u b e g in
By default, the
錯誤! 尚未定義樣式。 automatically assigns the
required Internet settings to your PCs. You need only to
configure the PCs to accept the information when it is assigned.
Note
In some cases, you may want to assign Internet information
manually to some or all of your computers rather than allow the
錯
誤 ! 尚未定義樣式。
to do so. See Assigning static Internet
information to your PCs on page 88 for instructions.
• If you have connected your LAN PCs via Ethernet to the
錯
誤! 尚未定義樣式。, follow the instructions that correspond
to the operating system installed on your PC:
• Windows® XP PCs on page 82
•
Windows 2000 PCs on page 84
•
Windows Me PCs on page 85
•
Windows 95, 98 PCs on page 86
•
Windows NT 4.0 workstations on page 86
•
If you have connected a PC via the USB port, see
Configuring a USB PC on page 89.
•
If you want to allow Wireless PCs to access your device,
follow the instructions in Configuring Wireless PCs on page
96.
Windows® XP PCs
1. In the Windows task bar, click the Start button, and then click
Control Panel.
2. Double-click the Network Connections icon.
3. In the LAN or High-Speed Internet window, right-click on the
icon corresponding to your network interface card (NIC) and
select Properties. (Often, this icon is labeled Local Area
Connection).
The Local Area Connection dialog box is displayed with a list
of currently installed network items.