User's Manual

錯誤 ! 尚未定義樣式。 User’s Guide Configuring your Computers
89
Co nfig uring a USB PC
Co nne c ting a c o m pute r to the USB po rt
If you use the
錯誤
!
尚未定義樣式。
’s USB port to connect to a
PC, you must install the provided USB driver software on the PC.
The driver enables Ethernet-over-USB communication with the
錯誤! 尚未定義樣式。.
Configuring the USB computer is a two-part process:
• In Part 1, you install the USB driver on the PC.
•
If your computer is running Windows 2000, 98, 98 SE or
ME, follow the instructions in Part 1A.
• If your computer is running Windows XP, follow the
instructions in Part 1B.
• In Part 2, you configure the IP properties on the USB PC.
Pa rt 1. Insta lling the USB Drive r
Ensure that the USB cable is not connected to the USB port on
the PC. The installation program will prompt you when to connect
the cable.
Follow the instructions in either Part 1A or Part 1B, depending on
which version of Windows is running on your PC.
Part 1A (Windows 2000, 98, 98 SE or ME)
1. Copy the USB installation files to a temporary directory on
the USB computer.
2. In the folder where you copied the files, double-click on
setup.exe to start the DSL Modem Setup Wizard.
The Installing window displays as the Wizard prepares your
system for the installation: