User's Manual

Protocol
Select UDP, TCP, or Both depending on what type of protocol your game or
application uses.
Enable
Click to enable the Virtual Server
Use Rule#
You can enable your virtual server for certain periods of time by assigning it
a Rule #. You must first set up the appropriate Scheduling Rule. See The
Schedule Rule and Schedule Rule Setting Pages on page 75 for more
information.
For example, if you have an FTP server (port 21) at 192.168.1.5, a Web server (port
80) at 192.168.1.6, and a game at 192.168.1.7, then you need, at minimum, to specify
the following mapping.
The Port Triggering Page
Port triggering opens an incoming port when your computer is using a specified
outgoing port for specific traffic. This provides a way for you to automate setting up a
Virtual Server with some applications. You can use the Port Triggering page to
configure which packets are allowed access.
ID Service Port Server IP Enable
1 21 192.168.1.5 Yes
2 80 192.168.1.6 Yes
3 5000 192.168.1.7 Yes