User's Manual

22 Travel Router with Wireless-N User Manual
this address.
• APN
This is the Access Point Name (APN) assigned by your service provider, if
needed.
• PIN
This is the Personal Identification Number (PIN) code assigned by your
service provider, if needed.
• Dialed Number
This number is assigned by your service provider, if needed.
• Account
This is the Account Name provided by your service provider, if needed.
• Password
This is the Password assigned by your service provider, if needed.
Go to Step 4. Wireless Settings
.
Step 4. Wireless Settings
The Wireless Settings page lets you configure the wireless settings for your Router and
devices. If you are happy to have no wireless security, click Next to go to Step 5. If all
of your network's wireless devices are capable of WPS security setup and you want
to use WPS, please go to Steps 5 and 6, then exit the Wizard and go to Chapter 3:
Wireless and Wireless Security on page 錯誤! 尚未定義書籤。. Otherwise,
continue below. EITHER WAY, after running the Setup Wizard you will need to make
sure that wireless devices connecting to the Wireless-N Router (computers, phones,
tablets, game stations, etc.) are set up properly as discussed in Chapter 3
.
• Wireless Module Accept the default, Enable. Click the Disable checkbox only if