Operation Manual

● 16
ADVANCED GUITAR EFFECTS PROCESSOR
You can choose any parameter of an effect module and change the setting and value as desired.
The flashing module moves to the LED for the selected module.
The flashing parameter LED moves to the LED for the selected
parameter.
• When you have switched a module or parameter, the display
changes accordingly.
• The settings of patch parameters and global parameters can
also be changed in the same way.
• The topmost parameter controls the effect type. When the effect
type is changed, the values of other parameters for that module
also change. For the distortion effect types of the PREDRIVE
and MAIN DRIVE modules and for the DELAY module, the
content of the effect parameters does not change.
The current parameter value changes.
For details about the types and functions of parameters of the
effect modules, see page 36 -45 , "Effect Types and Parameters".
The parameter changes made in this way are temporary. If you do
not store the new settings, they will return to the original values
when you return to Play mode and select another patch. (Global
parameters revert to the original setting when the unit is turned off.)
For information on storing patches, please refer to page 17.
NOTE
HINTHINT
BANK
FUNCTION
VALUE
ADVANCED GUITAR EFFECTS PROCESSOR
1.COMP
2.BOOSTER
3.OVERDRIVE
4.TALKING BOX
Sens/Gain
(Talking Gain)
Attack/Tone
(Talking Mode)
Level
(MIC Level)
VOLUME RTM
PRE DRIVE RTM
Gain/Top
Tone/Body
Level
ZNR
POSITION
MAIN DRIVE RTM
High/Depth
Midf/Rate/Sens
MidG/Reso
Low/Stage/Inv
Level
EQ RTM
Pitch/Key
Tone/Scale/Time
Shift/Mode/Dly
Bal/Mix
Amp Sim Mode
EFFECT1 RTM
Pitch/Key/Depth
Fine/Scale/Rate
Shift/Mode
Bal/Mix/Peak
SERI/PARA
EFFECT2 RTM
Time(x100mS)
Time(x1mS)
Feedback
Mix
SEAMLESS
DELAY RTM
Time
Tone/FB
Mix
Patch Level
FUNCTION Mode
REVERB RTM
1.OD
3.DIST
5.GRU
7.
METAL
1.3-BAND EQ
2.PHASE
3.PEDAL-WAH
4.AUTO-WAH
1.PITCH
3.DETUNE
4.PEDAL-PITCH
5.STRING
2.HPS 1.HALL1
3.ROOM 1
4.ROOM 2
5.PP-DELAY
2.HALL21.PITCH
3.CHO
5.TREM/PAN
6.RING MOD
1.NORMAL
2.ANALOG
3.HOLD
2.HPS
4.FLG
2.B-OD
4.FUZZ
6.LEAD
8.ACO
PRE DRIVE MAIN DRIVE EQ EFFECT 1 EFFECT 2 DELAY REVERB
TALKING BOX
POSITION SERI/PARA SEAMLESS
FUNCTION MODE BANK
(
VALUE
)
EDIT
(
CANCEL
)
GROUP STORE
1.MANUAL
2.BANK DOWN
3.DELAY(
TAP&HOLD)
4.BYPASS
5.MUTE
6.RTM
7.VOLUME
PRESETUSER
(BOTH) SEAMLESS
U
P
U O
2
3
1
VALUE
Changing Parameter Settings of Effects
STEP
1
Use the Module Select keys to select an effect module.
STEP
2
Use the Parameter Select keys to select the parameter.
STEP
3
Operate the VALUE knob.
STEP
4
Change other parameters in the same way.
Changing the Patch Sound (Edit Mode Operation)
HINTHINT