Operation Manual
25 ●
The RTM control target parameter changes gradually, causing a
change in the sound quality of the patch. When the end point of the
control range (maximum or minimum) is reached, the parameter
remains constant also if the FUNCTION switch is still depressed.
The RTM control target parameter gradually returns to the original
value.
You can release the FUNCTION switch already before the end of
the control range is reached. The setting will gradually return to
the original value.
• When using RTM control for a distortion effect type of the PRE
DRIVE or MAIN DRIVE module, and the RTM parameter is set
to "dn", pressing the FUNCTION switch will cause the Gain (←
RTM) parameter to change gradually from the reference value
towards the minimum value. When the RTM parameter is set to
"UP", the change will be from the minimum value towards the
reference value. The minimum value in this case depends on the
effect type and Gain (← RTM) parameter settings and may also
be smaller than the Gain (← RTM) parameter minimum value
(1). This is due to the fact that the value is optimized internally
by the 3000.
• When using RTM control for the PEDAL-WAH effect type of the
EQ module, setting the RTM parameter to "dn" will cause a
downward pitch shift and setting the parameter to "UP" will
cause an upward pitch shift when the FUNCTION switch is
pressed. In both cases, releasing the FUNCTION switch will
cause the pitch to return gradually to normal.
• When using RTM control for the PEDAL-PITCH (pedal pitch
shifter) effect type of the EFFECT 1 module, keeping the
FUNCTION switch depressed will cause a gradual upward or
downward shift. The direction is determined by the RTM
parameter ("dn" or "UP").
HINTHINT
STEP
12
Release the FUNCTION switch.
ADVANCED GUITAR EFFECTS PROCESSOR
NOTE
FUNCTION
switch
FUNCTION
switch
Reference value
RTM parameter set to positive value (1 - 10)
Value of
effect parameter
set by RTM
Reference value
Value of
effect parameter
set by RTM
RTM parameter set to negative value (-1 - -10)
STEP
11
While playing your instrument, press and hold the FUNCTION switch
FUNCTION
FUNCTION
Using the FUNCTION switch