Operation Manual

● 40
ADVANCED GUITAR EFFECTS PROCESSOR
■ Parameter 1 TYPE (Effect Type)
The following five effect types can be selected for
the EFFECT1 effect module.
Type 1 PITCH (Pitch Shifter)
Type 2 HPS (Harmonized Pitch Shifter)
Type 3 DETUNE
Type 4 PEDAL-PITCH (Pedal Pitch Shifter)
Type 5 STRING (Strings)
Depending on the selected effect type, the content of
parameters 2 - 5 and 7 changes.
■ Type 1 PITCH (Pitch Shifter)
Allows to shift the pitch over a range of 2 octaves up
or down.
●Parameter 2 Pitch
Determines the amount of pitch shift in semitones.
●Parameter 3 Tone
Adjusts the high-frequency range of the effect.
Lower values result in a softer sound with less treble.
●Parameter 4 Shift
Determines the direction of pitch shift. "dn" means a
downward change and "UP" an upward change.
●Parameter 5 Bal (←RTM)
Determines the level balance between effect sound
and original sound. "0" means original sound only,
and "1.0" (100) means effect sound only.
●Parameter 7 EFFECT1 RTM
Determines the change direction and control range
for the parameter marked with "←RTM".
■ Type 2 HPS (Harmonized Pitch Shifter)
Pitch shifter which creates harmonies using a preset
key and scale.
●Parameter 2 Key
Determines the main key for the scale (C, C#, d, d#,
E, F, F#, g, g#, A, A#, b).
●Parameter 3 Scale
Determines the scale of the harmony.
M3 = Major 3rd, m3 = minor 3rd, 4t = 4th, 5t = 5th,
6t = 6th
Effect Types and Parameters
This module contains mainly pitch shift type effects. The amp simulator (global parameter) settings are
also part of this module.
Parameter 1
TYPE
1. PITCH 2. HPS 3. DETUNE 4. PEDAL-PITCH 5. STRING
Parameter 2
Pitch Key Pitch Pitch
0, 1, 2, ･･･11, 12, 24 C, C#, ･･･A#, b −12∼＋12 0, 1, 2, ･･･11, 12, 24
Parameter 3
Tone Scale Tone Time
0∼10 M3, m3, 4t, 5t, 6t 0∼10 0∼99
Parameter 4
Shift Dly Mode Shift
dn, UP 0∼50 1∼8 dn, UP
Parameter 5
Bal (←RTM) Mix (←RTM) Bal (←RTM) Bal (←RTM)
0∼99, 1.0 0∼99, 1.0 0∼99, 1.0 0∼99, 1.0
Parameter 6
Amp Sim Mode (G)
oF, C1∼C9, b1∼b9, S1∼S9
Parameter 7
EFFECT1 RTM EFFECT1 RTM EFFECT1 RTM
−10∼＋10 dn, UP −10∼＋10
EFFECT1
■ Type 4 AUTO-WAH
This effect type creates an automatic wah effect that
depends on the picking intensity.
●Parameter 2 Depth
Determines the depth of the auto-wah effect.
●Parameter 3 Sens (←RTM)
Determines the sensitivity of the auto-wah effect.
●Parameter 4 Reso
Adds a special touch to the auto-wah effect.
●Parameter 5 Inv
Determines the direction of change for the auto-wah
effect. "dn" means a downward change and "UP" an
upward change of the emphasized frequency.
●Parameter 6 Level
●Parameter 7 EQ RTM
Determines the change direction and control range
for the parameter marked with "←RTM".