Operation Manual

47 ●
ADVANCED GUITAR EFFECTS PROCESSOR
Troubleshooting
Problem
Check Remedy
RP01 foot pedal
cannot be used
for RTM
(including pedal
wah and pedal
pitch shifter).
• Is a patch with RTM selected?
Activate Edit mode and make the RTM
settings (page 23).
• Is effect type with pedal wah or pedal pitch
shifter selected?
Verify that the PEDAL-WAH or PEDAL-
PITCH effect type is selected for EQ or
EFFECT1 (page 37, 38).
• Is Effect Monitor LED off (flashing)?
Press pedal switch so that LED becomes on
(lit).
• Is RP01 set to DELAY mode?
Press Mode Selector of RP01 to switch to
RTM mode.
• Is FUNCTION switch of 3000 set to
"6: RTM"?
When FUNCTION switch is set to "6:
RTM", RP01 foot pedal works as volume
pedal. Set FUNCTION switch to other mode
(page 32).
Pedal wah or
pedal pitch
shifter does not
turn on or off
when
integrated
switch of RP01
pedal is
pressed.
• Is RP01 set to DELAY mode?
Press Mode Selector of RP01 to switch to
RTM mode.
• Is 3000 FUNCTION switch mode set to
"6: RTM"?
When mode 6 (RTM) is activated, integrated
switch of RP01 pedal cannot be used to
switch pedal wah or pedal pitch shifter on
and off (page 32). Select another mode.
Talking box
effect cannot
be used with
microphone.
• Is microphone properly connected to MIC
IN jack?
Connect microphone as described on page
30.
• Is TALKING BOX selected as effect
type for PRE DRIVE module?
In Edit mode, verify that TALKING BOX is
selected as effect type for PRE DRIVE
module.
• Is MIC Level parameter of PRE DRIVE
effect module set to a suitable value?
In Edit mode, try increasing the MIC Level
parameter.