AP+4 Wireless Router/Access Point User Guide

12 Zoom AP+4 User Guide
¾ G if the network includes only 802.11g devices
•
•
•
•
•
•
At Wireless Operation, select
¾ AP if you are using the AP+4 as a Router/Access
Point or a Repeater
¾ Client if you are using the AP+4 as an Ethernet
Client
¾ WDS if you want to use the AP+4 as a Repeater in
WDS (Wireless Distribution System) mode.
¾ AP+WDS if you want the AP+4 to operate as both
an Access Point and a Repeater in WDS mode.
At Network Type (available only if the AP+4 is operating as
a Client) select Infrastructure (most users) or Ad Hoc.
At SSID (Service Set IDentifier), enter a network name. All
wireless devices on your network should use the same
name.
At Channel Number (available only if you selected Ad Hoc
channel as your Network Type), select a channel number
that isn’t being used by another nearby network. If you are
unsure which channel to use, try Channel 6.
Select Enable MAC Clone if for some reason you want to
use the MAC address of a device in the network instead of
the AP+4’s MAC address.
Enable Universal Repeater Mode (unavailable)
¾ SSID of Extended Interface (unavailable)
Click Next to continue.