AP+4 Wireless Router/Access Point User Guide

VPN Setup (Client)
On the main VPN Setup page, select the option button for a
VPN client and then click Edit to open the VPN client setup
page:
Parameter Select or enter . . .
Enable Tunnel x
Select this check box to enable a VPN tunnel
between the AP+4 and another VPN endpoint.
Note: You can configure multiple tunnels but
you can enable only one at a time.
Connection Name
Enter a client name of your choice.
Auth Type
Select an authentication method:
• PSK, then enter a Pre-Shared Key in the
Key Management section at the bottom of
the page.
• RSA if you generated an RSA key on the
main VPN Setup page.
Chapter 7. VPN Settings 63