AP+4 Wireless Router/Access Point User Guide

Access Control
Use this page to allow or deny access to the network.
Parameter Select or enter . . .
Wireless Access
Control Mode
Select:
• Deny Listed to prevent access by clients
whose MAC addresses are listed
• Allow Listed to permit access by clients
whose MAC addresses are listed
MAC Address
Enter client addresses, one at a time.
• Click Apply Changes after each entry.
• Click Reset to clear the current entry before
you apply the change.
Delete Selected In the Current Access Control List, click the
Select check box for one or more MAC
addresses and then click this button.
Delete All
Click this button to clear the list.
Reset Click this button to clear the Select check
boxes.
Chapter 4. Wireless Configuration 27