AP+4 Wireless Router/Access Point User Guide

WDS Settings
A Wireless Distribution System (WDS) expands a wireless
network by using multiple Access Points connected wirelessly.
All APs must use the same channel.
To use the AP+4 as a Repeater, on the Wireless Basic Setup
page at the Mode option, select AP+WDS. Then, on the WDS
Settings page, enter the MAC addresses of access points you
are communicating with.
Parameter Select or enter . . .
Enable WDS
Select the check box to enable WDS.
Add WDS AP
Enter Access Point MAC addresses, one at a
time.
• Click Apply Changes after each entry. The
AP MAC addresses appear one at a time in
the Current WDS AP List.
• Click Reset to clear the current entry before
you apply the change.
• Click Set Security to open the Wireless
Security Setup page and configure
security for the additional AP. The security
method must be the same as on the AP+4.
• Click Show Statistics to display Transmit
and Receive information for each
configured AP.
28 Zoom AP+4 User Guide