AP+4 Wireless Router/Access Point User Guide

WAN Interface
To set up or modify the way the AP+4 connects to the Internet, in
the left menu pane select TCP/IP Settings → WAN Interface:
Parameter Select or enter . . .
WAN Access Type
• DHCP Client if you are connected directly
to an ADSL or cable modem. (Most users
will select this option.)
• Static IP if you are connected directly to an
ADSL modem and are using a Static IP.
You usually have to make special
arrangements with your Internet Service
Provider to get a Static (fixed) IP address.
• PPPoE if you have an ADSL modem and
your provider requires PPPoE.
• PPTP if you are setting up a Virtual Private
Network (VPN). You must get a Static IP
address from your Internet Service
Provider.
Chapter 5. TCP/IP Settings 39