AP+4 Wireless Router/Access Point User Guide

PPPoE (ADSL only)
If you select PPPoE (Point-to-Point Protocol over Ethernet) as
your WAN Access Type, you see the following parameters:
Parameter Select or enter . . .
User Name
The login name given to you by your ISP –
typically the characters preceding the @ sign
in your email address.
Password
The login password given to you by your ISP.
Service Name
(Usually not required) Your service provider’s
name – given to you by the ISP.
Connection Type
• Continuous if the AP+4 is automatically
connected at power up and remains
connected. If the connection is dropped, it
will automatically be restored.
• Connect on demand if you connect when
you initiate communication over the
Internet. When the Idle Time interval
expires, the connection is dropped.
44 Zoom AP+4 User Guide