AP+4 Wireless Router/Access Point User Guide

64 Zoom AP+4 User Guide
Local Site Select Subnet Address or Single Address
Local IP
Address/Network
Enter 10.0.0.0
Local Subnet
Mask
(If Subnet Address is selected) Enter
255.255.255.0
Remote Site Select Subnet Address, Single Address,
Any Address, or NAT-T Address
Remote Secure
Gateway
Enter the WAN IP address of the remote VPN
connection.
Remote IP
Address/Network
Enter the LAN IP address or the LAN network
IP address of the remote VPN connection.
Remote Subnet
Mask
Enter the Subnet Mask of the remote VPN
connection.
Local/Peer ID
These four options let you limit use of the VPN
to a single user at each end of the tunnel.
Local ID Type
Select the type of identification entered by the
user at the local site: IP, DNS (URL), or Email.
Local ID
Enter the local user’s IP address, URL, or
email address.
Remote ID Type
Select the type of identification entered by the
user at the remote site: IP, DNS (URL), or
Email.
Remote ID
Enter the remote user’s IP address, URL, or
email address.
Key Management
Select:
IKE to use Internet Key Exchange Protocol.
Click the Advanced button to configure IKE
(see page
67).
Manual to enter encryption and authentication
keys.