AP+4 Wireless Router/Access Point User Guide

8 Zoom AP+4 User Guide
LED Status The AP+4 is . . .
PWR
Steady connected to a power source
WLAN
Flashing
Steady
broadcasting its SSID (network name)
not broadcasting its SSID and therefore
not available to wireless devices
seeking a wireless network connection
WAN
Steady
Flashing
connected either wirelessly or via
Ethernet cable to a broadband modem
that connects to the Internet
transmitting or receiving data
LAN 1-4
Steady connected via Ethernet cable to up to
four computers or gaming devices
ACT
(Activity)
Steady
Flashing
connected via the associated LAN port
to a computer or other network device
transmitting or receiving data via the
associated LAN port
Setting Up the AP+4
1
Open your web browser, enter 10.0.0.200 in the address
bar, and press the Enter key to open the Zoom AP+4
configuration software. The Status page appears first.
2 In the left pane, select Setup Wizard.
3 On the Welcome page, click Next.