ATA Quick Start Guide

3
If the ATA loses power or loses its Internet connection, you
cannot place calls through the Internet.
Advanced Features - Controlling the ATA from Your
Phone
Your ATA has a number of features that relate to calls traveling
through the Internet. These features can be controlled from the
phone plugged into your ATA as described below. For all these
commands you first take the phone off-hook and then enter
the command.
*55 Enable call waiting on all calls. When a call is waiting,
you will hear a tone. You can then do a hook-flash to
go back and forth between your 2 callers.
*56 Disable call waiting on all calls.
*59 Disable caller ID for call waiting calls.
*70 Turn off call waiting for the next call.
*71 Turn on call waiting for the next call.
*72 Forward all calls to <phone number> After you dial
*72, dial 8, then enter the phone number, then press #.
*73 Disable call forwarding.
*82 Enable caller ID for all outbound calls.
*62 Block caller ID on all outbound calls.
*65 Enable caller ID on all inbound calls.
*85 Disable caller ID for all inbound calls.
*67 Enable caller ID for the next outbound call.
*68 Block caller ID for the next outbound call.
*66 Redial the last number you dialed.
*69 Call the last person who called you.
*77 Block all calls that don’t have a caller ID.
*87 Stop blocking calls that don’t have a caller ID.
*78 Do not disturb. Your phone won’t ring!
*79 Turn off “Do not Disturb.” Lets your phone ring.