ATA Quick Start Guide

4
The commands above let you use a phone to directly control the
ATA. Note that some VoIP service providers also let you control
some of these
features
by using the setup screens for your account.
Note also that these features apply only to VoIP calls, not calls
that travel through the traditional phone network by way of your
TELCO jack. Features for the traditional phone network are
normally available from your traditional phone company.
Resetting Your ATA
You can reset your ATA by pressing the RESET switch. You can
do this by putting the end of a pin or paper clip into the small
round RESET hole in the back panel of the ATA. If you press the
RESET switch for 5 seconds or more, your ATA’s configuration
settings will return to the last ones provided by your service
provider. If you press the RESET switch for a much shorter time,
the ATA will reset as if you had powered it off, then powered it
on.
Registering Your Product and Getting Assistance
If you need assistance, you should consider contacting your service
provider.
We encourage you to register your product and to notice the many
support options available from Zoom.
- Please go to www.zoom.com and select Technical Support.
From here you can register your ATA and/or contact our
technical support experts and/or use our intelligent
database SmartFacts
tm
and/or get warranty information.
Special Information for VoIP Service Providers
This VoIP ATA is designed for VoIP service providers and users.
Service providers can easily tailor an ATA to suit customers’ needs
and location, and the service provider’s business model and
services. The service provider can also choose how to handle
updates, and whether updates should be automatic. If you are a
VoIP service provider, please contact Zoom in Boston, MA, USA
at [phone] or in the UK at [phone] to find out
the many ways we’ve tailored this product to meet your needs.