User guide

Advanced Settings Menu
EP5804K, EP5804K-T, EP6504K and EP6504K-T User Manual 59
Advanced Settings - Multi-Display Control Submenu
The menu is used for displaying one image across multiple displays. The software
allows you to tile up to a 5 x 5 array. With a DisplayPort signal, you can loop up to nine
displays. Additional displays may be added using a distribution amp. The loop
through function only works with the DisplayPort inputs.
It is also important to note that the maximum cable length between displays is three
meters.
Monitor ID
Used to manually set the Monitor ID of each display in the video wall.
Options: 1-25
Video Wall
Used for displaying one image across multiple displays.
Options: Yes, No
Note: If No is selected, all of the options below the Power On Delay line will be
grayed out.
Power On Delay
When powering on a video wall, this feature staggers the power on sequence so
that all displays will not turn on at once, reducing current requirements.
Options: 0~1.50 (in .05 second increments)