Specifications

27
ZOOM 606 GUITAR
Effect Parameters
26
ZOOM 606 GUITAR
Effect Parameters
PATCH LEVEL
PATCH LEVEL
Adjusts the overall volume of the patch. A value of 25 corresponds to
unity gain (input level and output level are equal).
COMP/LIMIT
COMP/LIMIT module
COMPRESSOR (Compressor)
This effect type attenuates high-level signal components and boosts low-
level signal components, thereby keeping the overall signal level within a
certain range. The effect prolongs sustain and makes the sound more
uniform. Higher setting values result in stronger compression.
LIMITER (Limiter)
This effect type attenuates peak levels and prevents overload of the next
module. Higher setting values result in stronger limiter action.
OFF (Off)
Turns the COMP/LIMIT module off.
This module is comprised of the compressor and
limiter effect types. Use the VALUE [+] / [-] keys
to select the effect type and adjust the effect
intensity.
TIME
LEVEL
TIME
LEVEL
TIME
LEVEL
TIME
LEVEL
Original sound
Compressor
Limiter
Original sound
WAH
WAH module
PEDAL WAH
This effect type allows using the expression pedal for pedal wah. Higher
setting values result in higher emphasized frequency.
Shifts the frequency emphasized by the wah effect up or down.
AUTO WAH
This effect type applies the amount of wah which is dependent on playing
intensity. Higher setting values result in higher input sensitivity for the
auto wah effect, so that wah operates also with low input signal levels.
Adjusts the auto wah sensitivity.
OFF
Turns the WAH module off.
Simply selecting PEDAL WAH as effect type is not enough to obtain
a wah effect when moving the pedal. To enable this function, you
must assign the expression pedal to the WAH module with the
PEDAL ASSIGN key.
Values 1 - 9 set a frequency to be emphasized even when the pedal
is not operated. This results in an effect similar to half-open pedal
wah.
This module comprises auto wah and pedal wah
for use with the expression pedal. Use the VALUE
[+] / [-] keys to select the effect type and adjust
the effect intensity.
NOTE
Effect Parameters PATCH LEVEL COMP/LIMIT Effect Parameters WAH