Specifications

13
ZOOM 606 GUITAR
Using the Tuner Function
Adjusting the reference pitch of
the tuner
Return to play
mode
Tune the other
strings in the same
way.
Press one of the [W] / [Q]
foot switches.
Press one of the VALUE
[
+
]
/
[
-
]
ke
y
s.
When power to the unit is
turned off and on again, the
setting reverts to the default
of "40" (center A = 440 Hz).
The right side of the
display shows a symbol
that indicates by how
much the tuning is off.
The current reference
pitch is shown for about
2 seconds. The default
setting is "40" (center A
= 440 Hz).
Use the VALUE [+] / [-] keys
to adjust the setting.
The setting range is 35 - 45 (center
A = 435 to 445 Hz).
The default reference pitch of the tuner (the setting which is
established when the unit is turned on) is center A = 440 Hz.
You can fine-ad
j
ust this reference pitch if desired.
Pitch is high Pitch is correct
Pitch is low
Indication turns faster the more the pitch is off.
Using the Tuner Function
12
ZOOM 606 GUITAR
Using the Tuner Function
Using the Tuner Function
Switch to bypass or mute
Tune the
guitar
Press both [W] / [Q]
foot switches
together.
Play the open string
you want to tune,
and watch the
display.
Bypass Mute
The left side of the display shows
the note which is closest to the
current pitch.
Pressin
g
and
immediatel
y
releasin
g
the s
w
itches sets the uni
t
to the b
y
pass condition.
Pressin
g
and holdin
g
the
switches for at least 1
second sets the unit to
the mute condition.
The 606 incorporates an auto-chromatic tuner for guitars. To use the
tuner function, the built-in effects must be bypassed (temporarily
turned off) or muted (original sound and effect sound turned off).
The tuner function is not available if the PLAY/EDIT selector is set to
a position other than PLAY.
NOTE