Specifications

15
ZOOM 606 GUITAR
Making/Changing DRIVE Module Settings
F d
2 6
Adjust the DRIVE
module gain
To switch the
DRIVE module
on or off
Press one of the GAIN [+] / [-] ke
y
s.
Press the GAIN [+] / [-] ke
y
s
to
g
ether.
The change made in this way is
only temporary. When you select
a different patch, the setting will
revert to the original condition. If
you want to keep the change,
store the patch, as described on
page 18.
Depending on which effect type is
currently selected, distortion depth or
signal gain changes. The GAIN
parameter value is shown for about 2
seconds on the display.
When the DRIVE module is
switched off, the DRIVE LED at the
top right of the DRIVE selector goes
out.
Making/Changing DRIVE Module Settings
14
ZOOM 606 GUITAR
Making/Changing DRIVE Module Settings
Making/Changing DRIVE Module Settings
FF d
2 6
NOTE
Select the DRIVE module
distortion type
When the DRIVE LED is out, the DRIVE module is off.
If you switch to a different effect type in this
condition, the module is automatically turned on.
Use the DRIVE
selector to select the
desired distortion
type (effect type).
By setting the
PLAY/EDIT selector
to the DRIVE
position, you can
check the current
effect type.
The selected effect t
y
pe
name is sho
w
n for abou
t
2 seconds on the displa
y
.
F
o
r
a
deta
il
ed
li
st
of
effect types, see the
section "Effect
Parameters" at the end of
this manual.
The DRIVE module comprises various distortion types and gain
settings, which can be adjusted with the dedicated selector and keys at
any time.
The following operation can be carried out in play mode or edit
mode.