Operation Manual
3.
Press
the
EXECUTE
key.
Adjusting
the
Input
Level
OLJTLIPI
0
MUTE
EXIT
WECUTE
!Id
The indicator of the DIAL key goes out, and the first
program of the new program group is selected.
If
you press the EXIT key or the DIAL key instead of the
EXECUTE
key, the indicator of the DIAL key goes out
and
the
9200
reverts to the normal program selection
mode, with the previous program still selected.
Whenever a new program group is chosen, thefiist program
in that group is selected. For a detailed explanation of
available program groups, please refer to the Program List.
Similarly
to
normal program selection,
it
is
possible to set up
the
unit
so
that the
EXECUTE
key must be pressed once more
afier selecting
a
group to select a program. For details, please
refer to page
47.
The
9200
allows you to set the input level individually
for inputs
1 -
4.
1.
Press one of the
FUNCTION
1
-
4
keys
in
Program
mode, to select one of the inputs
1
-
4.
The indicator of the respective
FUNCTION
key lights up,
and the input level setting for
the
respective input
is
shown
on the display. For example, if the
FUNCTION 3
key
was
pressed, the
(
)
in the display shown below flashes,
to
indicate that the input level for input
3
can
be
set.
FUNCTION1 INPUT
~&el setting
I
Level setting
I
for
input
1
Level setting
for
input
3
Level setting
for
input
2
for
input
4
2.
Play back the music source and adjust the level with
the Dial.
You should adjust the level so that the input level
indica~ors normally do not light
up
in
red.