Operation Manual

3. Hold down the FUNCTION 1 key while pressing the
FUNCTION 2 key.
FUNCTION / INPUT
By pressing more than one FUNCTION key at the same
time, the input level setting for the respective channels
can
be linked and adjusted together.
If the FUNCTION
1 key and FUNCTION 2 key were
pressed, the indicator of the FUNCTION
2 key also
lights
up, and the level of input 2 is set to the same value
as that for input
1. If the Dial now is turned, the input
level setting will affect both inputs. To release the linked
condition, press the FUNCTION
1 key or FUNCTION 2
key once more.
If the input from the mixer is a stereo signal, it is convenient
to link the two channels for level adjustment.
Muting All Effects
The 9200 allows you to turn off (bypass) all effects in
one operation. This allows you to check the results
of a
certain setting or program.
1. In the Program mode, press the MUTE key.
If the unit was in the mute off condition, the indicator of
the MUTE key will light up
and the indication "Effect
MUTE" appears on the display for as long as the key is
held down. All effects are now muted (all effect level
settings are temporarily set to zero). When the
MUTE
key is released, the display will revert to its original
condition but the "mute on" condition continues.
(Mute off condition)
4. Set the input level for other inputs in the same way.
(Mute on condition)
5. Press the EXIT key.
All FUNCTION key indicators go out, and the unit
returns to the Program mode.
OUTlLlTY 0 MUTE EXlT EXECUTE
(G-
OUTILITY 0 MUTE EXlT MKXm
(31
If currently no inputs are linked, pressing the FUNCTION
key whose indicator is lif will cause the indicator to go out arid
the unit will return to the Program mode.