Operation Manual
Pages and
Panmeters
Basic
Edit
Mode
Operation
Steps
The setting of parameters for each effect
is
made up of
several
pages.
One page covers up to four parameters.
Selecting
a
Page or Paameter
To
edit
the
parameters of a program, you call up the
1.
In
the Program mode, press one
of
the
EDIT
VIA
relevant page,
select
the desired parameter,
and
then alter
keys.
the
numerical values or the setting.
The page with the most recently edited parameter of the
current program
appears
on the display.
If the currently selected program belongs to program
architectwe II, you can set the parameters for up to two enect
modules. If the program belongs to program arc h itecture III,
you can set the parameters for up to three eflect modules, and
if
it
belongs to program architecture IV for up to four eflect
modules.
To
Activate the
Edit
Mode
In the
Program
mode, press one of the EDIT
VIA
keys.
(While
the key is depressed, the indication "Edit Mode"
appears on the display.)
The
9200
normally remembers the last edited parameter.
However,
if
you have selected another program in Program
mode and then have returned to
Edit
mode,
parameter
1
of
page
I
b
dkplayed.
r
EDlT
7
EDlT
7
EDlT
r
r
EDlT
V
A
SELECT ODlAL
To
Cancel
the
Edit
Mode
Press the EXIT key. The unit reverts to the Program
mode.