Operation Manual

Safety Precautions
Please observe the following safety tips and precautions
to ensure hazard-free use of the 9200.
Power Requirements
The voltage requirement for 9200 has been set
specifically for the main supply voltage in your area.
If it
is to be used in an area with
a different line voltage,
please consult your local
ZOOM distributor about
acquiring a proper voltage converter.
Avoid using your 9200 in environments where it
will be
exposed to:
Temperature extremes
High humidity or moisture
Excessive dust or sand
Excessive vibration or shock
Handling
Since the 9200 is a precision electronic device, avoid
applying excessive force to the switches and buttons.
Also
take care not to drop the unit, and do not subject it
to shock or excessive pressure.
Altem tions
Never open the case of the 9200 or attempt to modify the
product in any way since this can result in damage.
Connecting Cables and Input and Output Jacks
You should always turn off the power bcf'ore connecting
or disconnecting any cables. Also make sure to
disconnect
all cables and the AC power cord before
moving the 9200.
Caution!
The 9200 contains a backup battery which
maintains the effect programs stored in the
internal memory, even when the unit is turned
off.
The life of the battery is approximately
5
years. To avoid possible data loss, contact your
local
ZOOM distributor to have the battery
replaced by a qualified technician after
5 years.
Do not attempt to replace the battery by
yourself, since installing an improper battery
could result in an explosion.