Operation Manual

Utility menu. The display changes as follows.
1. Press the FUNCTION 2 key from the initial Edit
2.
Use one of the FUNCTION 1 - 4 keys to select the
desired parameter, and turn the Dial to adjust the
value.
FUNCTION I INPUT
m om om om
m
3. To terminate the Last Edit function, press the
UTILITY key again. The unit reverts to the Edit
mode.
OUTlLnV 0 MUTE EXIT UQCLm
As during normal editing, you can select the increment by which
the
Dial changes the parameter value (refer to page 24).