Operation Manual
2
MID1
mceive
on/off
(MIDI
Recv)
This page allows you
to
set the basic channel and make
other MIDI settings.
After you press the FUNCTION
1
key at the Utility
mode main menu, the following menu is displayed, and
you can choose one of the four pages with the
FUNCTION
1
-
4
keys.
To call up this page from the Program mode, you press
the following keys:
UTILITY
key
-L
FUNCTION
1
key
-L
FUNCTION
2
key
l
Basic
channel setting (MIDI
Basic
Ch)
This page lets you select whether the 9200 will receive
MIDI information or not. The page has three submenus
(2-1
to
2-3).
To call up this page from the Program mode, you press
the following keys:
UTILJTY
key
-L
FUNCTION
1
key
cl
FUNCTION
1
key
This page lets you use the Dial to select the basic
channel on which the 9200 will receive
MIDI
program
change and band select information.
Turn
the Dial
to
select the channel. The available settings
are ALL and
1
through
16.
If ALL is selected,
information
is
received on all MIDI channels.
When wishing to remotely control the
9200
from an external
MIDI
component, set the send channel
of
the
MIDI
component
and
the basic channel of the
9200
to the same
number, or use the
ALL
setting.
Use the FUNCTION
1
-
3
keys
to
select the type of MIDI
data, and use the Dial to set them to ON or OFF.
2-1
Receive
program change on/off
(MIDI
Recv
Prog Change)
To call up this page from the Program mode, you press
the
following keys:
UTILITY
key
.L
FUNCTION
1
key
L
FUNCTION
2
key
-L
FUNCTION
1
key
This page lets you select whether the 9200 will receive
MIDI
program change information or not. Use the
Dial
to
select ON or OFF.