Operation Manual
4
Program
change
number
mapping
(AUlDl
PC
#
Map)
To call up this page from the Program mode, you press
the following keys:
UTILITY key
4
FUNCTION
1
key
.1
FUNCTION
4
key
This page lets you select general system settings, such as
the program loading method and input mode.
After you press the
FUNCTION
2
key at the Utility
mode main menu, the following menu is displayed, and
you can choose one
of
the two pages with the
FUNCTION
1
-
2 keys.
This
function lets you assign programs of the 9200 to the
MIDI program change numbers
1
-
128, to facilitate
remote control via external equipment. Use the
SELECT
key to move the cursor
(
14
)
to the desired item, and use
the Dial to
set
the number.
1
Program
auto
load
on/off (Pmg
Auto
Load)
To call up this page from the
Program
mode, you press
the following keys:
(1)
MIDI bank number
and
program number:
Selects the MIDI bank number and program number to
which a
9200
program is assigned.
Available bank numbers are
0
(user area) or 1 (RAM
card),
each
with program numbers fiom
1
to 128.
Turning the Dial will continuously change the numbers
from
0-
1
to
0-
128.
If a RAM card is inserted, the range 1
-
1
to
1-
l28
is covered next.
(2) Program number:
Selects the program number of the 9200.
If the
MIDI
bank number is
0,
the available range is
INT/U
01
-
99 (user area
1
-
99). To make the unit
disregard program change information, use the setting
INT/U
xx.
If the
MIDI
bank number is
1,
the available
range is CRD/U
01
-
99
(RAM
card
area
1
-
99).
To make
the unit disregard program change information, use the
setting
CRDlU xx.
UTILITY key
L
FUNCTION 2 key
.1
FUNCTION
1
key
This page lets you
turn
automatic program loading
on
or
off.
Auto Load
OFF:
When the Dial is turned to change program numbers, the
next program is loaded only after pressing the
EXECUTE
key.
Auto
Load
ON:
When the Dial is turned to change program numbers, the
next program is loaded immediately.