User Manual

108
1, 2, 3,
e
Page 1 Page 2 Page 3
CC Number Type Minimum/Dec Number Maximum/Inc Number MIDI Ch
0-127
O – –
1-16
Absolute (send the knob
rotation position as an abso-
lute value)
0-127 (Minimum) 0-127 (Maximum)
Relative (when the knob
is turned, send the dier-
ence in values between
counterclockwise (Dec) and
clockwise (Inc))
0-127 (Dec Number) 0-127 (Inc Number)
HINT
• When Type is set to Absolute, the value of the current knob rotation position is output if is within
the range between Minimum and Maximum. If turned counterclockwise from the Minimum value or
turned clockwise from the Maximum value, no message will be output. Beware that even though
this can be used with many DAW applications, dierences could occur with the values sent by the
A if the controlled parameters are changed in the DAW.
• When Type is set to Relative, the value set by Dec Number is sent when the knob is turned coun-
terclockwise, and the value set by Inc Number is sent when the knob is turned clockwise.
Even if parameters have been changed in the DAW, values can be increased or decreased rela-
tively. However, correctly setting the Dec Number and Inc Number might be necessary depending
on the DAW.
K, D, m, H,
W, X, Y, Z,
w, x, y, z,
c, C,
R
, u, E
MIDI Ch Message Type Number
1-16
O –
Note 0-127
CC (control change) 0-127
Prg Chg (program change) 0-127
HINT
When Message Type is set to Note, pressing a button will send the note set by “Number” at a veloc-
ity of 127. Releasing the button will send it at a velocity of 0.
When Message Type is set to CC, pressing a button will send the CC number set by “Number” at a
value of 127. Releasing the button will send it at a value of 0.
MIDI message settings (continued)