User Manual

119
Setting the grip area
1.
CONTROLLER
Press g.
All the Ring Controller LEDs will light
blue.
HINT
When automatic grip setting (
→
P. 120) is ON,
lifting the Ring Controller will automatically put
it in this same state.
2.
CONTROLLER
Grasp the area to
set as the grip area.
The pads in the grasped range blink
white.
The pads at the same positions on the
top and bottom rings are also aected.
HINT
If a grip is not detected for 30 seconds, detec-
tion will automatically cancel.
3.
CONTROLLER
Press g.
The LED lighting of the Ring Controller
returns to its previous state, except the
LEDs in the grip area become unlit show-
ing that they will not respond to use.
HINT
• If a grip is detected and 1 second passes, it
will be set automatically.
• When the grip area is set, the g LED
will light.
Operations when grip area set
When STEP mode or INST mode is active abd
the grip area is set, the display will change and
show settings related to the Ring Controller, as
well as the current X and Y axis values.
■
Setting parameters to change using
the Ring Controller accelerometer
• Use e to select Ring Controller Acceler-
ometer.
Select the parameter to change (
→
P. 78).
■
Setting how the Ring Controller
lights
• Use e to select LED Mode.
Select NORMAL (ordinary lighting), MOTION
(light in response to accelerometer) or PAD 1
(light when pad 1 makes sound). Even when
MOTION or PAD 1 is selected, tapping pads
will output sound as usual.
Ring Controller settings (continued)