User Manual

124
The product firmware can be updated to the
latest version.
An update file for the latest version can be
downloaded from the ZOOM website (www.
zoom.co.jp).
Updating the Base Station
1. Copy the le for updating to the root
directory on an SD card.
2. Insert the SD card into the card
slot. Then, while pressing
M,
press and hold
p.
This opens an update confirmation
screen.
3. Use e to select Yes, and press E .
NOTE
Do not turn the power off or remove the SD
card during the update. Doing so could cause
the
A to become unstartable.
4. After the update completes, press
and hold
p to turn the power o.
Updating the Ring Controller
If you connect a Ring Controller that is using old
rmware to a Base Station, an update alert will
appear on its display.
If this occurs, follow the procedures below to
update the Ring Controller.
1.
CONTROLLER
While pressing and
holding P, press p.
The Ring Controller will start in update
mode, and an update screen will appear
on the Base Station.
NOTE
Conrm that the pad next to p is lit blue.
If it lights purple, connect the Ring Controller
and the Base Station (
→
P. 102).
2. Use e to select Yes, and press E .
The update progress screen opens on
the Base Station.
3.
CONTROLLER
After the update
completes, press and hold p
to turn the power o.
NOTE
Conrm the update result with the color of the
pad next to p.
· Update completed successfully: Green
· Update failed: Red
If the update failed, try again from step 1.
Updating the rmware