User Manual

38
Screen overview
■
PAD layout
Current bar
Shown when AUTO SAVE is On (→ P. 47)Pattern number
Tempo
Current layout
The sequence for the selected
instrument is shown on the
Ring Controller top ring.
Use 3 to change the number
of steps in one Ring Controller
cycle (
→ P. 41)
Use 2 to change the length
that will be used for future
notes input for the instrument
(
→ P. 42).
Use 1 to change the instrument
input position.
Input is possible at beat and
triplet intervals.
The number of bars per cycle
around the Ring Controller
depends on the settings (
→ P. 41).
The sequence for the
instrument one before the
selected instrument is shown
on the Ring Controller side ring.
Sequences are shown for
the selected instrument
and 5 instruments before
and 6 after.
Name and number
of instrument
shown on top ring
HINT
The settings for 1, 2 and 3 are only shown when their knobs are being turned.
■
SCALE layout
Selected note sequence
This is shown on the Ring
Controller top ring.
The selected instrument and
the sequence for one octave
of notes are shown.
Sequence of semitone
above selected note
This is shown on the Ring
Controller side ring.
Shown when AUTO SAVE is Off (LOCK)(→ P. 47)
These are shown when the entire sequence
cannot be shown on the Ring Controller because
a pattern is longer than two bars, for example.
STEP mode overview (continued)