User Manual

42
Changing note lengths
The lengths of input sounds (notes) can be set in
two ways.
■
Setting the note length before input
1. Use 2 to show the Duration
value.
This shows the length that will be used
for future notes input for the instrument.
2.
CONTROLLER
After setting the
Duration, tap the pad for the step
to be input.
The sound will be input for the set
Duration.
Duration 1/16 Duration 1/4 Duration 1/2
NOTE
The Duration setting will have no effect if the
LOOP item is × in the Oscillator list (
→
P. 133).
■
Setting when a sound starts and
stops
1.
CONTROLLER
Press and hold the
pad for the step to be input.
The pressed pad will blink.
Blinking
2.
CONTROLLER
Tap the pad where
you want the note to stop playing.
This changes the note length.
Dimly lit
HINT
The steps included in the length of the
changed note light dimly.
NOTE
The note length cannot be changed if the
LOOP item is × in the Oscillator list (
→
P. 133).
Pattern step input (continued)