User Manual

44
4. Use eect buttons and change
Quick Access function parameters,
for example.
These changes will be recorded as a
motion sequence.
· Setting eects (
→
P. 98)
· Setting Quick Access functions (
→
P. 92)
HINT
• Recording starts from the moment that a
parameter is operated, and recorded param-
eter values are shown in red.
• If a parameter that has already been recorded
is recorded again, the new data will overwrite
the old.
5. Press R or S when done
recording.
Setting changes for effect parameters and
parameters controlled by 1, 2 and 3 in
INST mode (Quick Access functions
→
P.92)
can be recorded as sequences.
You can record changes in real time while a
pattern is playing as well as record parameter
setting values step-by-step.
These recorded changes will be saved as a part
of the pattern and re-created during playback.
Recording motion sequences
in real time
1. Select the pattern for which you
want to record a motion sequence.
2. Press R.
3. Press P.
P lights and pattern playback starts
after the precount.
Motion sequences