User Manual

78
Ring Controller accelerometer
settings
You can use the Ring Controller's accelerometer
to control eect parameters. Parameters can be
changed by tilting the Ring Controller.
■
Assigning parameters
1. Press M.
Settings for the selected looper sequence
are shown.
2. Use e to select Ring Controller
Accelerometer, and press E.
This opens the X-axis parameter assign-
ment screen.
3. Use e to select parameter 1, 2
or 3 to be assigned to the X axis,
and press E.
4. Use e to select the parameter
to assign, and press E.
Making additional capture
settings
Make additional capture settings on the EDIT
screen.
■
Setting the capture synchronization
Set on the EDIT screen (
→
P. 95).
■
Set the capture tempo, which is
necessary for synchronization.
Set on the EDIT screen (
→
P. 95).
■
Set the capture length, which is
necessary for synchronization.
Set on the EDIT screen (
→
P. 95).
■
Setting the capture level
Set on the EDIT screen (
→
P. 96).
■
Setting the send eects
Set on the EDIT screen (
→
P. 96).
■
Setting the capture pad color
Set on the EDIT screen (
→
P. 95).
■
Setting the LED animation type.
Set on the EDIT screen (
→
P. 95).
■
Setting the LED animation timing
Set on the EDIT screen (
→
P. 95).
■
Changing captured recordings
assigned to pads
Set on the EDIT screen (
→
P. 97).
Looper settings (continued)