User Manual

Setting the auto save function

Enable parameters to be saved automatically.

• OntheSETUPscreen,turn

toselectAUTOSAVE.

• Press .

• Turn tosetAUTOSAVEtoON/OFF.

NOTE

When set to OFF, no patch or effect parameters will be saved automatically.

• Press to conrm the auto save setting.

Note about switching patches

WhenAUTOSAVEisset toOFF, if youtry to switch patches after changinganyparameters, a

message will appear asking to save the parameter changes.

To save changes to parameters before switching patches, select YES. (

P19)

To discard changes to parameters before switching patches, select NO.

Changing various settings