Specifications

16
Using the Anti-Feedback Function
Using the Anti-Feedback Function
1
To eliminate feedback
• Press .
• Eachtimeyoupress
, the unit detects the feedback frequency. Up
to 3 frequencies can be cut at once.
• Afterdetectingthefrequencycausingfeedback,theAnti-feedbackfunction
turns ON.
OFF Detecting (blinking) ON
The frequency range that is causing feedback can be detected automatically and cut
to stop the feedback.
NOTE
• WhentheAnti-feedbackfunctionisturnedoff,thedetectedfrequenciesareforgotten.
• Whentheunitisdetectingthefeedbackfrequency,itwillbecanceledifyouuseanyotherswitchorknob.
NOTE
• TheAnti-feedbackON/OFFsettingisnotsaved.ItisalwaysOFF
when the unit starts up.
• Afterdetectioncompletes,thescreenshowsthenumberoffeedbackfrequenciesthatarebeingcut.
• ToturnofftheAnti-feedbackfunction,press
again when 3 frequencies have been set.
HINT
1 frequency 2 frequencies 3 frequencies