Specifications

23
Changing Various Settings
NEXT
SETTINGS
2
To change mic input settings
• Turn to select MIC.
• Turn
to select the item to set.
• Turn
to change the setting.
• Press
.
• Press
.
• PHANTOM: Setthephantompowervoltage.
• LOWCUT: Toreducelow-frequencynoise,selectafrequencybandtocut.
• MICPHASE: Setthephaseofthemicinputsignal.
HINT
PHANTOM settings LOW CUT settings MIC PHASE settings
NOTE
• Ifyoupress to exit the PHANTOM page, the selected setting will become active.
• Somecondensermicswillnotworkwiththe+24Vphantompowersetting.Thisuseslesspowerthanthe
+48V setting, though, so it can help when using batteries.