Specifications

35
NEXT
Effect Types and Parameters
[DYN/FLTR]
Comp This compressor is in the style of the MXR Dyna Comp.
Knob1 Knob2 Knob3
Page01
Sense 0–10 Tone 0–10 Level 0–150
Adjusts the compressor sensitivity. Adjusts the tone. Adjusts the output level.
Page02
ATTCK Slow, Fast
Sets compressor attack speed to
Fast or Slow.
RackComp This compressor allows more detailed adjustment than Comp.
Knob1 Knob2 Knob3
Page01
THRSH 0–50 Ratio 1–10 Level 0–150
Sets the level that activates the
compressor.
Adjusts the compression ratio. Adjusts the output level.
Page02
ATTCK 1–10
Adjusts the compressor attack rate.
M Comp This compressor provides a more natural sound.
Knob1 Knob2 Knob3
Page01
THRSH 0–50 Ratio 1–10 Level 0–150
Sets the level that activates the
compressor.
Adjusts the compression ratio. Adjusts the output level.
Page02
ATTCK 1–10
Adjusts the compressor attack rate.
OptComp This compressor is in the style of an APHEX Punch FACTORY.
Knob1 Knob2 Knob3
Page01
Drive 0–10 Tone 0–100 Level 0–150
Adjusts the depth of the compression. Adjusts the tone. Adjusts the output level.
Page02
SlowATTCK This effect slows the attack of each note, resulting in a violin-like performance.
Knob1 Knob2 Knob3
Page01
Time 1–50 Curve 0–10 Level 0–150
Adjusts the attack time.
Set the curve of volume change during
attack.
Adjusts the output level.
Page02
Effect Types and Parameters
Flanger This is a jet sound like an ADA flanger.
Knob1 Knob2 Knob3
Page01
Depth 0–100 Rate 0–50
Reso -10–10
Sets the depth of the modulation. Sets the speed of the modulation.
Adjusts the intensity of the modulation resonance.
Page02
PreD 0–50 Mix 0–100 Level 0–150
Sets pre-delay time of effect sound.
Adjusts the amount of effected sound
that is mixed with the original sound.
Adjusts the output level.
Effect type Effect explanation
Parameter Parameter range
Effect screen
Tempo synchronization possible icon
Parameter explanation