Specifications

40
Effect Types and Parameters
Effect Types and Parameters
Spring This reverb effect simulates a spring reverb.
Knob1 Knob2 Knob3
Page01
Decay 1–30 Tone 0–10 Mix 0–100
Sets the duration of the reverberations. Adjusts the tone.
Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
PreD 1–100 Level 0–150 Tail OFF/ON
Adjusts the delay between input of the
original sound and start of the reverb sound.
Adjusts the output level.
When ON, effect sound continues
even after effect is turned off. When
OFF, effect sound stops right when
effect is turned off.
Arena This reverb effect simulates the acoustics of a large enclosure such as a sports arena.
Knob1 Knob2 Knob3
Page01
Decay 1–30 Tone 0–10 Mix 0–100
Sets the duration of the reverberations.
Adjusts the tone.
Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
PreD 1–100 Level 0–150 Tail OFF/ON
Adjusts the delay between input of the
original sound and start of the reverb sound.
Adjusts the output level.
When ON, effect sound continues
even after effect is turned off. When
OFF, effect sound stops right when
effect is turned off.
EarlyRef This effect reproduces only the early reflections of reverb.
Knob1 Knob2 Knob3
Page01
Decay 1–30 Shape -10–10 Mix 0–100
Adjusts the duration of the reverb. Adjusts the effect envelope.
Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
Tone 0–10 Level 0–150 Tail OFF/ON
Adjusts the tone. Adjusts the output level.
When ON, effect sound continues
even after effect is turned off. When
OFF, effect sound stops right when
effect is turned off.
Air This effect reproduces the ambience of a room, to create spatial depth.
Knob1 Knob2 Knob3
Page01
Size 1–100 Tone 0–10 Mix 0–100
Sets the size of the space. Adjusts the tone.
Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
Ref 0–10 Level 0–150 Tail OFF/ON
Adjusts the amount of reflection
from the wall.
Adjusts the output level.
When ON, effect sound continues
even after effect is turned off. When
OFF, effect sound stops right when
effect is turned off.
ModReverb This reverb generates fluctuating echoes.
Knob1 Knob2 Knob3
Page01
Depth 0–100 Decay 1–30 Mix 0–100
Sets the depth of the modulation. Adjusts the duration of the reverb.
Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
Rate 1–50 Tone 0–10 PreD 1–100
Sets the speed of the modulation. Adjusts the tone.
Adjusts the delay between input of the
original sound and start of the reverb sound.
Page03
Level 0–150 Tail OFF/ON
Adjusts the output level.
When ON, effect sound continues
even after effect is turned off. When
OFF, effect sound stops right when
effect is turned off.