Specifications

41
Effect Types and Parameters
SlapBack This reverb creates a repeating echo effect.
Knob1 Knob2 Knob3
Page01
Time 0–1000
Decay 1–30 Mix 0–100
Sets the delay time.
Sets the duration of the reverberations.
Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
F.B 0–100 Tone 0–10 DRBal 0–100
Adjusts the feedback amount. Adjusts the tone. Sets the ratio of delay and reverb.
Page03
Level 0–150 Tail OFF/ON
Adjusts the output level.
When ON, effect sound continues
even after effect is turned off. When
OFF, effect sound stops right when
effect is turned off.
HD Hall This is a dense hall reverb.
Knob1 Knob2 Knob3
Page01
PreD 1–200 Decay 0–100 Mix 0–100
Adjusts the delay between input of
the original sound and start of the
reverb sound.
Sets the duration of the reverberations.
Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
LoDMP 0–100 HiDMP 0–100 Tail OFF/ON
Adjusts low frequency damping in
reverb sound.
Adjusts high frequency damping in
reverb sound.
When ON, effect sound continues
even after effect is turned off. When
OFF, effect sound stops right when
effect is turned off.
Plate This simulates a plate reverb.
Knob1 Knob2 Knob3
Page01
PreD 1–200 Decay 0–100 Mix 0–100
Adjusts the delay between input of
the original sound and start of the
reverb sound.
Sets the duration of the reverberations.
Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
Color 0–100 LoDMP 0–100 HiDMP 0–100
Adjusts the reverb time of the low
frequencies.
Adjusts low frequency damping in
reverb sound.
Adjusts high frequency damping in
reverb sound.
Page03
Tail OFF/ON Level 0–150
When ON, effect sound continues
even after effect is turned off. When
OFF, effect sound stops right when
effect is turned off.
Adjusts the output level.
[MIC]
Dyna 57 This simulates the sound of miking with a Shure SM57.
Knob1 Knob2 Knob3
Page01
Dist. On, Off Posi. Hole, Brdg Level 0–150
Sets the mic distance. Sets the mic position. Adjusts the output level.
Page02
Cond 414 This simulates the sound of miking with an AKG C414.
Knob1 Knob2 Knob3
Page01
Dist. On, Off Posi. Hole, Brdg Level 0–150
Sets the mic distance. Sets the mic position. Adjusts the output level.
Page02
Cond 87 This simulates the sound of miking with a Neumann U87.
Knob1 Knob2 Knob3
Page01
Dist. On, Off Posi. Hole, Brdg Level 0–150
Sets the mic distance. Sets the mic position. Adjusts the output level.
Page02