Specifications

ZOOM CORPORATION 4-4-3 Kanda-Surugadai, Chiyoda-ku, Tokyo 101-0062 Japan http://www.zoom.co.jp
Z2I-1606-01
Quick Guide
Body type selector
Choose the body type that matches your guitar.
Pickup type selection switch (side)
Use to set the best input characteristics for the type of pickup used.
PIEZO : Setting for acoustic guitars with piezo pickups.
MAGNETIC : Setting for acoustic guitars with magnetic pickups.
FLAT : No adjustment for the pickup type.
GROUND switch (back)
Connect or disconnect the BALANCED OUT connector with the ground.
LIFT : Disconnect the grounding pin from the signal path.
CONNECT : Connect the grounding pin to the ground.
Master level knob
Adjust the master level.
Mic gain knob
Adjust the mic input sensitivity.
Pickup gain knob
Adjust the pickup input sensitivity.
Press and Hold Function
Equalizer knobs
Adjust the tone.
BASS : Adjust to boost or cut low frequencies.
MIDDLE : Adjust to boost or cut middle frequencies.
TREBLE : Adjust to boost or cut high frequencies.
Balance knob
Adjust the balance between original (DRY) and
effected (WET) signals.
Change and save patch
memories, change
settings and check version
information
Change the patch memory
and set the order that the
footswitch changes patch
memories
Make settings related to the
mic input
Select mic input settings
Set the phantom power
voltage
Select the low cut frequency
used on the mic input
Set the phase of the mic
input
Set the mic input mix position
Select the press and hold
f u n c t i o n of t h e e f f e c t
footswitch
Turn the Auto Save function
ON or OFF
Set the battery type
Adjust the display contrast
and backlight time
Guitar tuning
Select the effect category
Setting the tempo
View version information
Save patch memories
Chan g e p a t ch me m o r y
names
Detects and cuts feedback
frequencies
Anti-Feedback
Function
Adjust effect parameters
Select the effect type
Press
Turn
, or
Press
Press
Press and hold
Press
or
Adjust the depth of each
filter
Turn feedback frequency
detection ON
Press
Press
Effects
Select the effect to
adjust
Turn ON/OFF
Press
Press
Increase the input signal
level
Boost Function
Turn boost ON/OFF
Adjust the amount
of boost
Adjust the tone
Press
Press
Press
Press
You can set whether this activates the Bypass Tuner,
Mute Tuner or Tap Tempo function.
Change this setting on the HOLD FOR TUNER/TAP
screen. The default setting is MUTE TUNER.
© 2013 ZOOM CORPORATION Copying or reproduction of this document in whole or in part without permission is prohibited.