Specifications

9
Adjusting the Tone and Volume
4
To adjust the equalization
5
To adjust the amount of the original sound
6
To adjust the master level
Adjust the balance between original (DRY) and effected (WET) signals.
• Turn .
• Turn
.
• Turn
.
NOTE
• Theeffectedsignalisthesoundcreatedbythepickupselection,preamp,effect,boostandequalizer
settings.
• : Adjust to boost or cut low frequencies (around 60Hz) by up to ±12dB.
•
: Adjust to cut middle frequencies (around 700Hz) by up to –12dB.
•
: Adjust to boost middle frequencies (around 400Hz) by up to 12dB.
•
: Adjust to boost or cut high frequencies (around 8kHz) by up to ±12dB.
HINT