Operation Manual

Turning the unit on

• Minimize the volume of the output device.

• Prepare the power source.

Using an AC adapter

Connect the AD-16 adapter to the .

Using batteries

Open the battery cover on the bot-

tom of the unit and install batter-

ies into the battery compartment.

• Set the power switch to "ON" or "eco".

Power indicator

(front panel)

Lit green: Remaining

battery power okay

Lit red: Remaining bat-

tery power low

• Turn the output device on, and raise its volume.

POWER switch "eco" setting

The power will automatically turn off if unused for 10 hours.

If you want the power to stay on always, set the POWER switch to "ON".

NOTE

The power indicator lights red when the remaining battery power becomes low.

Replace the batteries with new ones.

You can also use a USB cable to connect the to a computer and power it with USB bus power.

HINT