User manual

30
To create a Virtual server:
1 Click Advanced SetupÆ NATÆ Virtual ServersÆ Add to
open the Add Virtual Servers page.
2 For the server name check the list of predefined games and
applications to see if yours is on the list. If it is, go ahead and
select it. You will need to enter the IP address of your
computer or gaming station in the Server IP Address field but
the rest of the information will be filled out for you.
3 Click Save/Apply to save your new virtual server.
4 If your game or application was not on the list continue to step
5 to create a custom Virtual Server.
5 Enter a Custom Server name for your virtual server.
6 Enter the IP address on the computer or game station that you
want to use the virtual server with in the Server IP Address
field.
7 You should set up a fixed DHCP address for that device to
prevent the IP address from changing in the future
8 For each range of ports you need to open up enter the Starting
and Ending External Ports and the Protocol used. Your
game documentation should provide you with this
information.
9 If you only need to open one port, enter that port number in
both the Start and End External Port fields.
10 Once you enter the External Ports, the Internal Port fields will
automatically be set to the same values. The Internal ports
cannot be changed.
11 If you know the Remote IP address of the device you are
connecting to, enter it under the Remote IP field. If you don’t
know it you can leave this field blank.
12 Click Save/Apply to save your new virtual server.