User manual

34
6
Management and Diagnostics
Please read this chapter if you want to perform modem
management functions, as discussed below, or if you want to run
diagnostics to diagnose a modem problem. If you don’t want to do
either of these things, your modem is probably set up and ready to
go. You may want to read
Appendix B: Top and Back Panels,
for details about the modem’s lights and back panel jacks.
Management Buttons
The buttons in the Management group are typically used for
administrative tasks, such as upgrading firmware, changing your
Zoom Configuration Manager password, etc.
The following table lists each button in the Management group
and gives a brief description of the settings you can specify.
Open page from… This button… Opens a page that lets you…
ManagementÆ
Settings
Backup
Update
Restore Default
Save your current configuration settings
to a file so that they may be restored at a
later time.
Upload your previously saved settings.
Restore the X5 settings to the factory
defaults.
Management System Log By default the System Log is disabled.
You must Enable it and then click View
System Log.
View data generated or acquired by
routine system communication with
other devices. This information does not
necessarily represent unexpected or