User guide

Chapter 2: Setting Up Your Wireless Network 25
Checking Your Settings
If you ever need to check your wireless settings, you can do so
from the Wireless Setup page. This page is available in the Zoom
Configuration Manager by clicking the Wireless icon.
The table below explains the settings:
This setting… Lets you specify…
Wireless Status Enable
shows that your wireless network is up.
Disable
indicates that your wireless network is
down.
SSID
The Service Set Identifier for your wireless network.
By default, the SSID for the
X6
is
zoom
. You can
change the SSID to any name that you want.
Default Channel
The channel your wireless connection uses by
default for your wireless connection. The
X6
comes
set for channel
10
.
Profile
The standard used by your wireless adapters. This
drop-down list contains
802.11b Only
,
802.11g
Only
, or
Mixed Mode
.
The default is
Mixed Mode
, which allows you to
mix both
b
and
g
wireless adapters.
Encryption
The type of encryption used for your wireless
Internet signal. This drop-down list contains
None
,
WEP-64 bit
,
WEP 128 bit
, and
WPA
.
The default is
None
, meaning that no security is
enabled.
Country
If your country is not listed, select
Other.