User guide

Chapter 3: Setting Wireless Security 29
Setting Up Security Using WEP
If all of your network devices DO NOT support WPA, you can
use WEP to configure network security. WEP can be configured
two ways: 64-bit and 128-bit. 128-bit WEP provides a bit more
security than 64-bit, but 128-bit WEP also tends to diminish
network performance. We recommend that most people configure
their WEP for 64-bit security.
1
11
1 Click the Wireless icon in the Zoom Configuration
Manager. This will open the Wireless Setup page. Go to
Encryption (which should say None) and select WEP-64 bit
(or WEP-128 bit for more security, but diminished network
performance) from the drop-down menu. Six new boxes open
directly below the Encryption box.
2
22
2 Check the box marked Passphrase and then choose and enter
a Passphrase. You can enter a word or a phrase, or for greater
security you can enter a combination of numbers and letters.
The Passphrase is case-sensitive and can be up to 8 characters.
If ALLof the wireless devices (clients) on the network are Zoom
devices, go to step 3. If some or all or the devices are not Zoom
devices, go to step 4.